rtl8189es之ad-hoc模式配置

WiFi_001

1、加载驱动
root@lierda:~# insmod 8189es.ko
rtl8189es driver version=v4.1.2_4787.20120803
build time: Apr 11 2013 18:10:15
register rtw_netdev_ops to netdev_ops
Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
......
udev: renamed network interface wlan0 to wlan2
2、为开发板配置静态IP
root@lierda:~# ifconfig wlan2 192.168.1.2
+871x_drv - drv_open, bup=0
+rtl8188es_hal_init
......
<=== rtw_ips_pwr_down..................... in 30ms
3、配置模式为ad-hoc
root@lierda:~# iwconfig wlan2 mode ad-hoc
set_mode = IW_MODE_ADHOC
......
4、配置ad-hoc的essid
root@lierda:~# iwconfig wlan2 essid "lsd8189es"
ssid=lsd8189es, len=9
......
5、打开PC的无线网络扫描，搜索不到“lsd8189es”
6、配置模式为master
root@lierda:~# iwconfig wlan2 mode master
set_mode = IW_MODE_MASTER
....
7、配置模式为ad-hoc
root@lierda:~# iwconfig wlan2 mode ad-hoc
set_mode = IW_MODE_ADHOC
......
8、配置ad-hoc的essid
root@lierda:~# iwconfig wlan2 essid "lsd8189es"
ssid=lsd8189es, len=9
9、打开PC无线扫描，搜索到“lsd8189es"
10、配置PC静态ip为192.168.1.18，连接到”lsd8189es"
11、在板子中测试
root@lierda:~# ping 192.168.1.1
PING 192.168.1.18 (192.168.1.18): 56 data bytes
64 bytes from 192.168.1.18: seq=0 ttl=64 time=21.546 ms
64 bytes from 192.168.1.18: seq=1 ttl=64 time=10.841 ms

--- 192.168.1.18 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss